Yes, although our installers make the seams as tight as they can, industry standards say that 1/16” seam with a tolerance of + 1/64” is acceptable. Because our seams are so tight, lippage (uneven heights in a seam) may appear more obvious. Lippage occurs due to variances in slab thickness or a concave/convex warp in the slabs. Slab thickness can vary up to 1/8”.

Yes, each brand of Quartz material is backed by the manufacturers limited warranty.

Although Quartz is a very hard & durable product, the use of trivets and cutting boards is recommended.

No, quartz is a non-porous surface that never requires sealing.

High impact to the stone can chip it. A certain amount of care is recommended with your Quartz countertop. Chipping and/or damaging the Quartz usually requires some amount of effort. Your plate or cup is more likely to be damaged than the Quartz.

Our goal is for the overhang to equal 1 ½”. However, the overhang often varies depending on the straightness of the cabinet installation.

img

TRU-REZ™

View FAQ
img

Solid Surface

View FAQ
img

Granite

View FAQ

Did We Answer Any Questions?

If not please let us know we’ll get right back to you within 24 hours!