|
Vangura® Solid Surface may be cleaned with warm water and mild soaps, such as
those used for hands or dishes. A mild non-abrasive household cleaner such as
Fantastik® and Formula
409® may also be used. Cleaning products containing bleaching agents should not
be used on Vangura® Solid Surface. Large quantities of these agents and extended
periods of exposure may cause discoloration. A mild abrasive cleaner (such as
Comet®, Soft Scrub®, Bon Ami®,
etc.) can be used on solid surface material.
If a stain develops on the surface, wipe it away with soap and water or glass
cleaner. If a stain doesn't respond to soap and water, and your surface has a
matte finish, apply a mild abrasive cleanser. For a gloss finish, you should
contact dealer or before attempting repairs.
Do not expose the surface to harsh chemicals, such as paint remover, turpentine,
nail polish remover (acetone) or stove and drain cleaners. If these chemicals
come in contact with the surface, immediately wash them off with water, using
appropriate safety measures to avoid injury.
Always use a cutting board instead of cutting directly on the surface. While
minor cuts and scratches can be repaired, care should be taken to prevent them
in order to keep the surface looking as good as new.
Hot pans and heat-producing appliances (frying pans, baking pans, electric skillets,
crockpots, coffeepots, etc.) must be placed on a trivet with legs, to dissipate
the heat.
Should you need help with an unusual problem, please contact your dealer.
|
